Search This Blog

Eden's Graduation Shrug Instructions

If you have any questions or need clarification, please feel free to email me here.




-->
Hang rag hem and knit 1 row of ravel cord. I used red for demonstration purposes.

Beginning on the left side, cast on using double e-wrap method.    





--> Key Plate .3 (KP) Dot 3

--> Knit 20 rows (I only knit 17 for demonstration purposes) and convert to 2X2 ribbing.    
--> Knit 2 rows and change to KP 4


-->
The first row of eyelets:

Beginning on the right and moving left

Leave (or skip) stitch #1 on the needle
Move stitch #2 to #3 needle
Skip stitch #4 on the needle
Move stitch #5 to #6 needle
Move stitch #8 to #7 needle
Skip stitches 9,10 and 11
Move stitch #12 to #13
Move stitch #15 to #14
Skip stitches 16, 17 and 18
Cont across…
--> Make sure the empty needle latches are open and that they catch the next row of stitches.    
-->
Knit 6 rows

-->
Begin a series of 4 stitch cables. 2 left over 2 right.

There will be 3 stitches between each cable.

Hint… to avoid dropping stitches on the next row of knitting, bring all of the cable needles to forward working position. Make sure the latches are open and knit the row slowly.


-->
Notice the first row of eyelets are the base for the 4 stitch cables. 

--> Knit 6 rows.
--> The next row of eyelets are made by placing stitch #1 over stitch #2 and then stitch #3 over stitch #2 of the 3 stitches that are between the 4 stitches of the cable.
--> There will be 3 stitches on the cent needle between the cables. Bring these needles to the forward working position to knit the next row and avoid dropping stitches. Make sure the needle latches are open.
--> Knit 6 rows and add another row of 4 stitch cables.    
-->
Knit 6 rows and begin the last row of eyelets.

This row of eyelets will involve the “outside” stitches of the cable.

Place stitch #1 of the cable on the needle to the right and stitch # 4 on the needle to the left of the cable. Stitches #2 & 3 are left on their respective needles.

Bring forward the empty needles and the needles with the doubled up stitches. Make sure the stitches are behind the latches and the latches are open before you knit the next row slowly.
--> Knit 2 rows.
--> Change to KP .3
--> Knit 20 rows and convert to 2X2 ribbing. 
--> Crochet cast off.
-->
Remove the rag hem by pulling the ravel cord.

See the differences between the double e-wrap cast on and the crochet bind off edges?

The double e-wrap edge is the neck edge on this shrug. It has a bit more body than the looser crochet bind off edge which will give a little flair around the back and waist area.
-->
Don’t let the plethora of colored yarns distract you. I only used the different colors for clarification.

Turn the wrong (purl) side of the shrug towards you.
--> Fold the ribbed edges so that they meet.





-->
I am stitching this with a darker yarn for demonstrations purposes.

I am seaming very loosely just so that you can see where to pick up the stitches.

Match the ribbing.




--> The seaming yarn does not even show even though it is much darker!    
-->
You can add a cuff if you wish…

I hand knitted the cuff on Eden’s Graduation Shrug. I could have just as easily worked the cuff on the USM prior to seaming the arms.

Using size 8 circular needles, pick up stitches evenly around the arm edge and knit a 1X1 ribbing for 5 rows.

Change to size 5 needles and continue ribbing for 2 rows.

Row 3: k2tog, p2tog, k1, p1 (repeat till the end of the row)
Row 4: knit all stitches.
Repeat rows 3 & 4 until there are only 14 stitches remaining on the needles.
Knit 4 rows and bind off.

-->
Crochet edge:
In the first stitch 1 sc
In the second stitch 1 hdc
In the third stitch 3 dc
In the fourth stitch 1 hdc
Repeat.




Eden’s Graduation Shrug MY NOTES

KP .3

112 needles

Hang rag hem and k 1 row of ravel cord

Beginning on left side – double e-wrap cast on

K 20 Rows and convert to 2X2 ribbing

K 2 Rows

Change to KP 4

First row of eyelets

Beginning on the right and moving left

Leave (or skip) stitch #1 on the needle
Move stitch #2 to #3 needle
Skip stitch #4 on the needle
Move stitch #5 to #6 needle
Move stitch #8 to #7 needle
Skip stitches 9,10 and 11
Move stitch #12 to #13
Move stitch #15 to #14
Skip stitches 16, 17 and 18
Cont across…

Make sure the empty needle latches are open and that they catch the next row of stitches.    

K 6 Rows

Begin a series of 4 stitch cables. 2 left over 2 right.

There will be 3 stitches between each cable.

Hint… to avoid dropping stitches on the next row of knitting, bring all of the cable needles to forward working position. Make sure the latches are open and knit the row slowly.

Notice the first row of eyelets are the base for the 4 stitch cables.

Knit 6 rows.

The next row of eyelets are made by placing stitch #1 over stitch #2 and then stitch #3 over stitch #2 of the 3 stitches that are between the 4 stitches of the cable.

There will be 3 stitches on the cent needle between the cables. Bring these needles to the forward working position to knit the next row and avoid dropping stitches. Make sure the needle latches are open.

Knit 6 rows and add another row of 4 stitch cables.

Knit 6 rows and begin the last row of eyelets.

This row of eyelets will involve the “outside” stitches of the cable.

Place stitch #1 of the cable on the needle to the right and stitch # 4 on the needle to the left of the cable. Stitches #2 & 3 are left on their respective needles.

Bring forward the empty needles and the needles with the doubled up stitches. Make sure the stitches are behind the latches and the latches are open before you knit the next row slowly.

K 2 Rows

Change to KP .3

Knit 20 rows and convert to 2X2 ribbing.

Crochet cast off

Remove the rag hem by pulling the ravel cord.

See the differences between the double e-wrap cast on and the crochet bind off edges?

The double e-wrap edge is the neck edge on this shrug. It has a bit more body than the looser crochet bind off edge, which will give a little flair around the back and waist area.

Turn the wrong (purl) side of the shrug towards you.

Fold the ribbed edges so that they meet. Seam

You can add a cuff if you wish…

I hand knitted the cuff on Eden’s Graduation Shrug. I could have just as easily worked the cuff on the USM prior to seaming the arms.

Using size 8 circular needles, pick up stitches evenly around the arm edge and knit a 1X1 ribbing for 5 rows.

Change to size 5 needles and continue ribbing for 2 rows.

Row 3: k2tog, p2tog, k1, p1 (repeat till the end of the row)
Row 4: knit all stitches.
Repeat rows 3 & 4 until there are only 14 stitches remaining on the needles.
Knit 4 rows and bind off.

Crochet edge:
In the first stitch 1 sc
In the second stitch 1 hdc
In the third stitch 3 dc
In the fourth stitch 1 hdc
Repeat for second cuff